Laser Mould Welding Machine

DM-MJ-150W laser Die welder, the laser can be turned to all direction, and the worktable can be operated by electricity; mainly used in oversize, large-scale and medium-sized moulds' repairing.the machine is controlled by Industrial micro-Computer. Application: Plastic mold, forging die, stamping mold, die-casting mould and so on. Widely used in mobile phone, digital product, automobile, motorcycle mold making and molding industry.Laser mould welding machine(Manual laser welder ) is use the high energy of heat that instantaneously produced by laser to melt the special-purpose welding wire and connect it with the damaged parts of the mould so it can connect with the original material firmly, after that it shows a refacing by electric spark and grind &cutting and some other processing and so the mould is repaired.Product Highlights Laser control system:DM-W150 mold welder is under the control of double closed loop by inside improved industrial controlling micro-computer so the stability and the running ability surpass products that controlled by monolithic integrated circuit. The laser controlling system can control the power source profile precisely pre-set optimized. Gas protecting system: synchronous argon protecting system controlled by micro-computer act better, it make the welding connection even firmer and artistic. Being controlled to keep synchronous transmission with laser can save the argon at the highest level. Observing system: It's equipped with special-purpose microscope observing system with cross cursor. It has high speed electron flitting device to protect the operator's eyes from being hurt. Parameters Name Parameters Datas Max. laser average power 150W Laser peak value power 5KW Laser wave length 1064nm Max.single pulse energy 120J Pulse width 0.3-20ms Welding frequency 0.5-100HZ Cooling Mode Water-cooling Welding Spot size 0.2-2mm Welding depth 0.1-3.5mm Laser welding wire0.2-0.8mm Positioning Microscope(Optional CCD) Max. welding position500mm x 1000mm Laser working area 200mm x 200mm x 300mm Laser control mode Electromotion Power consumpted ≤11KW Electrical demand 220V±10% / 50Hz / 30A Usage environment Clean,no shaking,Temperature 13 °C -28 °C, humidity 5% -75%